File Name: types of plumbing pipes and fittings .zip
Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps.
For the average homeowner, knowing which plumbing fitting goes where can be a challenge. There are many different types, sizes, and materials to consider. Which ones you need depends on the job. An adapter has male and female ends, the male having threads on the outside and the female on the inside. There are three types of adapters: male, female, and straight-threaded. If one of the ends of the adapter is without threads, it needs to be welded or soldered onto the pipe. Adapters are essential when it comes to extending or terminating pipe runs.
Since plumbing was first invented, the material used for piping has been an important factor. In the early days of plumbing in the ancient world, lead and clay piping was used to transport water to homes and public buildings. In the early twentieth century, when plumbing began to move into homes in the U. Lead piping was also common and was the material of choice for plumbing pipes until World War II. However, as the understanding of lead poisoning increased, the popularity of lead piping fell off, particularly for water that was meant to be potable. After World War II, galvanized screw piping gained favor as the material of choice for plumbing pipes inside the home, and a few decades later, in the s, copper became more popular.
Fresh water comes in under pressure to fixtures such as sinks , bathtubs, showers and toilet tanks. Waste water is expelled from the home through drain pipes and from there into the sewer or septic system. Vent stacks help the water drain and vent sewer gases to the outside. Here are some of the most common:. Adaptors connect pipes that are not the same type.
Plumbing is all about pipes and fittings. Pipes establish the runs that bring or take water, with fittings controlling and manipulating the flow. Pipes are simple enough: they're straight, and come in different sizes. Pick the right material and length, and you're pretty much good to go. Fittings - for a plumber - are much the same. But for the average homeowner, there are a lot of fittings.
A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube , adapt to different sizes or shapes, and for other purposes such as regulating or measuring fluid flow. Fittings especially uncommon types require money, time, materials, and tools to install, and are an important part of piping and plumbing systems. Standard codes are followed when designing or manufacturing a piping system. Organizations which promulgate piping standards include:.
Ppr Pipe Catalogue Pdf. Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. Airport North Rd, Embakasi P.
of the plumbing system in a building, various types of Fittings are fixed in the plumbing disposal of water is known as a pipe fitting (Fig. ).Reply
To make sure everything in your plumbing system works as it should, there are various types of plumbing fittings in use. Here are 14 common.Reply